Hot rolling refers to the process in which the steel is rolled above the recrystallization temperature. After cooling at room temperature, the steel is normalized and cooled to become a hot rolled finished steel product. If the application is not strict on diameter tolerance and surface finish, the cost of hot rolled bars is lower than that of cold finished bars. Hot rolled bars are ideal materials for many forging and machining applications, such as in fasteners, bolts, connecting rods, hydraulics, fittings, gear blanks, shafts, hubs, pistons, etc.

hot rolled bars Hot rolled steel is steel that has been roll-pressed at very high temperatures. Hot rolled steel is steel that has been roll-pressed at very high temperatures—over 1,700˚F, which is above the re-crystallization temperature for most steels Hot rolled round steel bars, usually named “round bars”, are produced by hot rolling continuously cast steel billets. Round bars are used in hot die pressing and forging but they may also undergo cold finishing.

A variety of mechanical components such as gears, hubs, shafts, drives and many more can be obtained by die pressing and forging. They all have to resist, sustain and transfer motion and must not warp. In this field, steel fosters real industry development.

Size range:-

Hot rolled round 10 mm to 300 mm

Forged round 200mm to 700 mm

Rolled square 8mm to 150 mm

Forged square  100 to 500 mm

Rolled flat 20×5 upto 80×300

Forged flat  50×200 upto 150×400

Grades available:-

MS,EN8,EN8D,CK45,C10,C20,C30,C35,SAE1010,SAE1018,EN18,EN19,SAE4140,ST52,SAE8620,EN353,SAE1144,31CRMO4,42CRMO4,EN1A PLAIN,20MNCR5,16MNCR5We are stockist and suppliers of hot rolled bars in multiple grades as below grades: M.S, L.C, , EN-8, , EN-8M, EN-9, EN-15, EN-15 AM, EN-16, EN-18, EN-19, EN-24, EN-31, EN-32 B, EN-45, EN- 353, 31 CrV3, 42 CrMo 4, 16Mncr5, 20Mncr5, 20Mn2, 27Mn2, 31 Cr4, SAE – 1010, SAE – 1018, SAE – 4042, SAE – 4140, SAE – 8620, SAE – 52100 a, SAE – 1524, SCM – 435, 10B – 21, 15B – 25, C-20, C-50, 35C8